IS ARRIVE FAST
LIKE BEAR
ROCKET BEAR

Gunner didn't even send me a tracking number. Oh well. Boneyard G3 from Airsoftmegastore got here too. All fixed up with a new gearbox from an Echo 1 M4.

The PPSh's mag has trouble feeding, and the hop-up bucking was incorrectly installed. Not that I should expect much better from a couple Chinese guys building toy guns in a Hong Kong basement. Any tips on how to get the orange paint off without ruining the finish?

>>6008

IS SEXY...LIKE SEXY BEAR.

Did the strap come with the gun?

As for the orange tip, Either spray paint or redo the whole thing by itself.

>>6009
Yeah, it comes with the sling.
I guess I'll spray over the orange.

Also, the battery compartment is tiny as hell. I'm gonna have to get a new 9.6v mini because the one I've got is a nunchuck-type and won't fit.

>>6002

Not like it's a contest or anything, just describe what you're doing and how long it takes you.

Also, the size of the sites I play at and the state of the overgrowth, if you drop something, you either pick it up then and there or it's gone, brah.

hmm define chest rig
All ive got in a plate-carrier with pouches, does that count?

>>6006

Yeah pretty much the same deal

I just have a bunch of motorolas that we speak to each other with. No headsets or anything yet, but it looks like a cool investment.

Well last game I was at Communication was crap, so this is a necessity, I was afraid of Throat mikes, due to there shittyness, so I might just pick up some Motorollas and then mikes will be supplied by my other squad members.

Dont go with throat mics man. They fucking suck dick. My last unit I was in gave them to us, tried them on one mission, and never again used them. The headset in your pic is excellent though. Just use that and a Push To Talk, and youll be golden.

>>5987
>>5986
Thanks for the info. Just had bad experiences in the past not one of 4 guns ever got put back together.
So if i do try to replace this how much would it cost at an airsoft store approximately. I live in the SF bay area.

>>5993
http://www.airsoftgi.com/product_info.php?products_id=5449


15 bucks if your feeling lucky. To get it fixed by someone else it's anyones guess

I've had a similar problem with mine. You might wanna check to see if the hop unit is still locked in place inside the outer barrel "gas block/battery housing" area.
On the G36 the hop up is held in place by two plastic tabs inside the gas block. It is then pushed out into the feeding nozzle above the magazine by means of a spring. Needless to say, if the tabs break or the gas block splits open (very brittle plastic on both in Chinese guns) the spring pushes the hop up out of place and bbs will no longer enter the hop up.
Take a look by opening the hadguard, splitting the receiver and unscrewing the gas block out of place and pulling everything out.

Hicaps because I have a Marui FA-MAS and a 9.6v battery. Fuck yeah BB hose.

>>5914
Actual firearm magazine well dimensions != Airsoft gun magazine well dimensions (there are exceptions to this obviously like that one time someone posted their AR with the CMMG lower with a hicap in it and whatnot, but i believe my point makes some sense)

As for myself, I've been a fan of midcaps for quite a while (I love KA's L5 midcaps for the looks, but the spring retention/access compartment breaks like a motherfucker and the buttplates aren't rubberized ;_;), but after a little bit of consideration I'm considering investing more in hicaps. Can anyone vouch for King Arm's PTS Hicaps? After my experiences with the L5s, even if they look great, I would rather get an opinion of them before I drop the cashmoney.

>>5988

BUT airsoft Pmag geometry = real Pmag geometry

And the HK416 magwell is like the real deal, too long.

AND I'd tried to put a Pmag in a JG 416, the shit doesn't fit :/

>>5961
Sure is, too bad, but I might have enough moneyz before the upcoming game. Any recommended ones?

>>5920
http://www.airsoftpost.com/product_info.php?products_id=32548

>>5982

Too lates, I don't like that lack of RIS though.

ive bought from there, and i had a good experience. they promptly answered my emails and i received the order in 1 week from California to buffalo, NY. also, box was a little damaged, but nothing major. gun was in perfect condition.

I own one of these, and am in Canada too :)

They're a real fun piece to have, kinda game-able more so on the not game-able side though.

If you're interested in a game-worthy cheap K98 in Canada -Pick up the Dboys when you get a chance too, pick up a VSR-10 and mod 'em together.

Voila, mag fed, Bolt Action K98 that is reliable to game even in colder seasons.

But yeah getting AV'd can take some time, very much worth it though.
Best of luck

Speaking of which...
What region you from and who are you trying to contact?

>>5970
In quebec, near valleyfield, and im trying to contact Mij

>>5893

Yeah, V2 and V3 gears are compatible.
I wouldn't change anything before it breaks though.

Also, unless yours is really old, the G&G GEARS should be stronger than those in your TM.

>>5893
If all you want to do is swap a motor you just have to figure out what kind of motor it is goddamn

>>5944

Fuck damn nigguh let this bitch die I didn't buy the shit mah nigguh